8 megabyte waveset. 

The 8MB waveset is located in the waveset directory of the installation CD.
To install the 8MB waveset in Windows 95, copy it to a directory on your 
system and then use the Configurator to add it and make it active. 
To install the waveset under Windows NT 4.0, 
choose add waveset from the sound card's driver dialog. 
NOTE: The 8MB waveset is recommended in systems with at least 64MB of RAM.

The Configurator includes a waveset manager and a 3D audio test. 
The waveset manager tool allows users to easily install and 
remove custom wavesets from their system.  
The 3D audio test can be used to optimize speaker positioning as well 
as select the desired 3D audio mode. 
To access this utility, right click on the mixer icon in the task bar 
and select Configuration utility or run it from the sound card's start menu item. 

*******************************************************************************
DOS test waveset.

The DOS test waveset is located in the waveset directory of the installation CD.
The DOS test waveset is the smallest waveset we could make that includes
ONLY the instrument necessary to playback the MIDI notes for APTEST.EXE.
It is designed to fit on a boot floppy disk with the other necessary files 
to test the sound card in MS-DOS Mode.
NOTE: This is not a complete waveset. It should not be loaded in Windows.

The DOS Drivers and Utilities necessary to run the DOS test from a boot floppy are 
only installed by the sound card's setup program in Windows 95 or Windows 3.x.
The Windows 95 or Windows 3.x sound card setup must be completed first.
NOTE: The required files cannot be obtained from Windows NT or MS-DOS.

Create a 3.5" 1.44MB boot floppy by formatting the disk with the /S option
(or by checking the "Copy system files" box in the Windows format dialog box.)
This boot floppy should contain the following files once it is formatted (Windows 95):

DRVSPACE.BIN  (Read-only,Hidden,System file)
IO.SYS        (Read-only,Hidden,System file)
MSDOS.SYS     (Read-only,Hidden,System file)
COMMAND.COM

The following two system files are required to load the sound card's DOS driver.
They should be copied from the \Windows folder or the \DOS folder of your system.

EMM386.EXE
HIMEM.SYS

Some of the sound card's DOS drivers and utilities are also required. 
If you have completed the Windows 95 or Windows 3.x installation
these files are copied to the DOS Drivers & Utilities folder. 
The following files should be copied to the boot floppy:

APINIT.COM
APLOAD.EXE
APTEST.EXE
AUDIOPCI.BIN
DOS4GW.EXE
APCONFIG.EXE

The DOS test waveset is the only waveset small enough to fit on the floppy.
It should be copied to the boot floppy from the waveset folder of the Install CD.

DOSTEST.ECW

A few configuration files must be created on the BOOT FLOPPY to load the sound card.
Use a text editor, such as NOTEPAD.EXE or EDIT.COM to create the following files on
the BOOT FLOPPY disk (not the hard drive.) 
The text to enter in each file follows the filenmame.

CONFIG.SYS
__________
device=a:\himem.sys
device=a:\emm386.exe
____________________________________________________________


AUTOEXEC.BAT
____________
set SNDSCAPE=A:\
set BLASTER=A220 I5 D1 T2
a:\apinit.com
a:\aptest.exe
____________________________________________________________


SNDSCAPE.INI
____________
[sndscape.drv]

; Product ID
Product=Soundscape

; Ports - PCI, Base/MIDI, Wave, and Sound Blaster Device
PCIPort=180
Port=330
WavePort=e84
SBPort=220

; IRQs - PCI, MIDI and Wave/SoundBlaster emulation
PCIIRQ=11
IRQ=5
SBIRQ=5

; DMA Channel Wave/SoundBlaster emulation
DMA=1

; Switches - Self-Config, SoundBlaster/Soundscape emulation enable,
; Joystick enable 
SelfConfig=true
SBEnable=true
JSEnable=true

; Mixer Settings - Wave, Synth, and CD volumes
MasterVol=127
WaveVol=127
SynthVol=127
CDVol=127

; Waveset - path and file name of current waveset
SynthFile=a:\dostest.ecw
____________________________________________________________

NOTE: The SNDSCAPE.INI contains the sound card's hardware settings. 
The sample values to be entered in the SNDSCAPE.INI may conflict 
with another device in your system and might need to be changed.

This is the completed boot floppy file list:

A:\IO.SYS        (Read-only,Hidden,System file)
A:\MSDOS.SYS     (Read-only,Hidden,System file)
A:\DRVSPACE.BIN  (Read-only,Hidden,System file)
A:\COMMAND.COM
A:\EMM386.EXE
A:\HIMEM.SYS
A:\DOS4GW.EXE
A:\APINIT.COM
A:\APLOAD.EXE
A:\AUDIOPCI.BIN
A:\APCONFIG.EXE
A:\APTEST.EXE
A:\DOSTEST.ECW
A:\CONFIG.SYS
A:\AUTOEXEC.BAT
A:\SNDSCAPE.INI

After all the files are copied and the configuration files edited,
insert the boot floppy into the system with the sound card and reboot.
The card should be loaded and the DOS test should be executed.

When you've completed the test, remove the disk and reboot.